Cat5e UTP Patch Cable
Unifiber offers high quality cat5e network patch cable. Includes unshielded (UTP) and FTP (Foil twisted pair) configurations. Welcome to request a free quote or samples for quality evaluation.
Construction of Unifiber Cat5e UTP Snagless Boot Patch Cord
Our Unshielded Cat5e Snagless, molded strain relief boot is made by injection molding, where the jacket material of the cable is pushed right into the connector and around the individual wires. They are designed with secure and efficiently constructed release tabs.
Benefits
In this way, the cable and connector is protected and dislodging of the RJ45 connector from the cable is less likely to happen as the molded boot provides strain relief support for the RJ45 connectors.
Applications
Cat5e UTP with snagless boot, RJ45 connectors Patch Cable is best for applications requiring frequent connection and disconnection from the source in many data centers.
Cat5e Crossover UTP Patch Cable
Unifiber carry Cat5e UTP Crossover cables when you want to connect devices without using hubs or switches. Our Cat5e UTP crossover cables are unshielded and terminated with 50 Micron gold plated contacts RJ45 plugs at each end. With crossover cables, you can easily connect two computers, still keeping great signal integrity.
1. Conductors:24AWG or 26AWG or 28AWG stranded bare copper.
2. Insulation: polyolefin
3. Color code:
- pair1: Blue, white/blue
- pair2: Orange, white/orange
- pair3: Green, white/Green
- pair4: Brown, white/brown
4. Ripcord: under jacket
5. Jacket: pvc or LSZH
Cable Spec.
| 1. Conductors | 24AWG or 26AWG or 28AWG stranded bare copper. |
| 2. Insulation | polyolefin |
| 3. Color code | pair1: Blue, white/blue |
| pair2: Orange,white/orange |
| pair3: Green,white/Green |
| pair4: Brown,white/brown |
| 4. Ripcord | under jacket |
| 5. Jacket | pvc or LSZH |
| 6. Standards | UL444/CSA-C22.2 No 214,Type CM |
| EIA/TIA-568A and EIA/TIA-568B.2,Horizontal cable |
| 7. Applications | internet,computer |
| 8. UTP | unscreen cable |
| 9. STP | single shielding Network cable ,Mylar tape,Aluminum-mylar tape and Drain wire |
| 10. SFTP | Double shielding cable,Mylar tape,Aluminum-Mylar tape and drain wire and bare or tinned copper braid |
| 11. Network cable Connector detail specification | RJ45 8P8C nickel type |
| RJ45 8P8C golden type |
Wiring Scheme:
| ANSI/TIA/EIA-568-C.2 | T568A & T568B;ISO/IEC 11801 |
| 8-position conductor/pair assignment |
| T568B | 1-2/3-6/4-5/7-8 |
| T568A | 3-6/1-2/4-5/7-8 |
| CORDAGE |
| Constructor | 4 pairs, 7 strands, 24/26 AWG, UTP |
| Cable Type | UTP Cat.5e Patch Cable |
| Outer Cable Diameter | 5.5mm ± 0.2 mm |
| Pair Identification |
| Pair1 | Blue/White |
| Pair2 | Orange/White |
| Pair 3 | Green/White |
| Pair4 | Brown/White |
| Outer Jacket | PVC/LSZH Jacket |
| Plug |
| Type | Unshielded RJ45 8P8C Modular Plug |
| Housing | UL listed 94V-0/1/2 flame retardant polycarbonate |
| IDC blades | phosphor bronze, gold plating over 100 μin of nickel in contact area |
Mechanical
| Retention | 50 N (11 lbf) for 60±5 s |
| Mating cycle life | min 750 cycles |
| Tensile strength | ≥ 20 N per wire |
| Installation Temperature | 0°C to +60°C |
| Operating temperature | -20°C to +60°C |
| Minimum bend radius | 4 outer cable diameters |
| Boot Type: | Any type of the above picture |
| Length | 0.3m-30m or As per requested |
| Color | Grey/Green/Blue/White/Black/Red/Yellow |
| Package | polybag or Blister Package |
Product Tags:
|
|
Indoor Copper Patch Cables , Utp Cat5e Patch Cable Snagless Boot Patch Cord Images
|
